Fish Scaled Gecko with Guitar - UNPAINTED 3D Resin Figure - Pepunki Creatures

**This listing is for one UNPAINTED resin print/figure.**
It will be solid resin grey in color

Fish Scaled Gecko with Guitar!
Whimsical animalfolk miniatures for your TTRPG adventures and collections!

This print will be measured from top to bottom. The entire height of the print.
Pepunki makes very detailed and very intricate prints, which also makes them fragile and not made for children. Most come in one solid piece but some are in parts that may need to be glued (by you the purchaser) to hold together fully.
25mm = One inch
Any print over 60mm maybe printed hollow, which will have a small drain hole (I will replace and repair said hole, but it will be there).

The above pictures are from Pepunki Creatures inventory. You purchase will not be painted as in the photos.

PLEASE READ ALL THE DESCRIPTION BEFORE YOU PURCHASE, ask any question you may have.

I offer all my prints in many different sizes so you can choose to have them for table top playing or just a fun project to paint and display.

PRIMED - If you need it primed I will have a separate listing to get primer added to your resin print. This is NOT painting the print I will just be airbrushing on primer (a solid colored undercoat) to make it easier for you to get it painted. I can't guarantee the resin will accept paint if not primed.

I start printing at the time of the order, and anyone who knows printing can tell you it can be a slow and tedious process (and prints can fail from time to time) so please be patient. 3D printing is not perfect and small imperfections or possible printing artifacts can occur. I do my best to fix anything I find. I would never send a print out that I wouldn't proudly display in my house.

I mainly use a light or dark grey resin, depending on which printer I use. All are printed on a 12k resolution printer. My steps are to print, clean, remove supports, clean again, uv cure for a durable print, check again for any possible flaws.

Open Range Miniatures is a licensed merchant to sell many of the physical print from Pepunki Creatures: https://www.myminifactory.com/users/pepunki-creatures?show=tribe
If you see something there you like, send me a message and I will get a price for you.

Please support the designer by only purchasing physical prints from merchants who are licensed to sell the designer's creations or by only purchasing the STL files directly from the designer.

If you have ANY problem with your order PLEASE contact me to make it right, before you leave any review. I take customer satisfaction very seriously!